NT abrasive blasting: assess the coating as well as the blasting medium
Abrasive blasting creates hazards from both the abrasive and the surface being stripped. A relatively safer blasting medium does not establish that an old coating or substrate is safe. Check available material information and investigate unidentified surfaces before selecting the process (sections 3.1–3.2, pages 16–27).
Containment is only one control
The code addresses restricted materials, dust, high-pressure particles, equipment, recycling and waste. Enclosures and exclusion zones reduce exposure to nearby people, while a nozzle-controlled, fast-acting cut-off addresses uncontrolled discharge. Equipment condition and safe handling remain essential. See sections 3.3–3.6, pages 28–34.
Consider noise, heat, vibration and confined-space conditions alongside the dust assessment. Air monitoring and health monitoring answer different questions and should not be treated as interchangeable evidence of safety (chapters 2 and 4).
Maintenance example
For stripping a gate or metal fixture, first identify its coating history and where the job will occur. Ask whether occupied areas, ventilation intakes or access routes could receive dust. Determine how residues will be collected and handled before starting, rather than improvising cleanup afterwards. This is an illustrative planning exercise, not a finding that a coating contains a hazardous substance.
Retain product information, test results where obtained, control selection, equipment inspections and waste arrangements. Record unknowns explicitly. The immediate next action for an unidentified coating is to resolve the material uncertainty and choose controls accordingly, not label it safe because its appearance is familiar.
Status and limits
NT WorkSafe lists this code as varied on 14 September 2023. It is approved practical guidance; current legislation, including any later chemical restrictions, takes priority. Use specialised advice where the material or exposure cannot reliably be assessed.

Comments