NT confined spaces: an entry permit is not a rescue plan
A cramped room is not automatically a legally defined confined space. Identify the space against the definition and assess its atmosphere, engulfment and other hazards before deciding which specialised requirements apply.
Controls before entry
The code prioritises avoiding entry. Where entry is necessary, a competent person’s written permit identifies the space, entrants, work period and controls. Isolation must address connected services, machinery and stored energy. Atmospheric controls, communication and a standby person are separate safeguards, not substitutes for the permit. Entry for an initial assessment is still entry. See sections 1.1, 3.4 and 4.1–4.8, especially pages 28–36.
Emergency arrangements must be established before work. Consider rescue access, equipment, trained personnel and testing of procedures, rather than assuming outside emergency services can provide an immediate rescue (chapter 5, pages 39–40).
A practical facility check
For a correctional facility’s tank or service-space job, ask: who controls isolation, who verifies atmosphere, who remains outside, and how can rescuers physically reach the casualty through secured access? Record each answer against the actual work and shift. This is an illustrative checklist, not a finding about any facility.
Keep the permit, assessment, isolation record, training evidence and rescue arrangements together. A signed document alone does not prove that its controls operated. Equally, a missing copy is a reason to investigate recordkeeping, not automatic proof that no controls existed.
Status and limits
NT WorkSafe lists the code as varied on 12 March 2026. It is approved guidance, not a replacement for the Act and Regulations; an alternative must achieve equivalent or better safety. This guide does not authorise entry or replace a competent, site-specific assessment.

Comments