NT: Respirable crystalline silica and dust from maintenance work
The Northern Territory approved this code under section 274. The instrument was signed on 12 January 2026 and notified in Gazette G5 on 12 March 2026. The separate regulatory controls for crystalline silica processes are not new merely because the code is new.
Decide how the task will be controlled before it starts
The official code PDF, sections 2.2–2.5 and 3, distinguishes controlled processing, the assessment of whether it is high risk and the additional requirements for high-risk work. Those can include a silica risk control plan, worker training and air and health monitoring under the regulations. Respiratory protective equipment does not displace reasonably practicable higher-order controls.
For a correctional workshop or maintenance job, check what the contractor or workforce will cut, drill or grind, how dust will be controlled, who may be exposed nearby and who will verify the controls. Confirm which tasks are permitted in the first place, particularly where legacy engineered stone is involved. Keep the task assessment, plan and monitoring records through the appropriate safety channels. The source PDF is linked rather than copied.

Comments