NT workplace noise: measure exposure and protect communication
The noise exposure standard is 85 dB(A) averaged over eight hours and a 140 dB(C) peak. Duration and peak events matter, not just whether a place sounds loud during a short visit. The code also addresses interference with communication and other hearing-loss contributors (chapter 2).
Reduce exposure before relying on earplugs
Assess tasks and exposures, then control noise at source or along its path where practicable. Hearing protectors are not the starting and finishing point of the assessment. Selection must account for fit, actual use and the need to hear instructions or warnings. See chapters 4–5, particularly pages 23–25.
Under regulation 58 as set out in the code, workers required to frequently use hearing protection against noise exceeding the standard need audiometric testing within three months of commencing that work and at least every two years. Testing informs review of controls; it does not replace them (pages 26–27).
A facility-level audit
Separate workshop machinery, maintenance tasks and impulse-noise activities rather than averaging unrelated jobs into one reassuring description. For communication-critical work, test whether the chosen protection allows safe understanding of instructions. Do not infer hearing damage, its cause or individual fitness from noise exposure alone.
Collect the competent noise assessment, task durations, equipment changes, protection selection and testing arrangements. Keep individual health results confidential. A practical first action is to identify which noisy jobs lack a current exposure assessment and assign responsibility for checking them.
Status and limits
NT WorkSafe lists this code as varied on 12 March 2026. It is approved guidance and must be read with current law. This guide does not diagnose hearing loss or prescribe protection for a specific noise source.

Comments