Tasmania’s workplace exposure limits: prepare for 1 December 2026
What Tasmania has announced
WorkSafe Tasmania says the new workplace exposure limits arrive on 1 December 2026. Its local guidance identifies changes affecting diesel exhaust, welding, construction, timber processing, food production and other activities. This is a preparation date for affected workplaces, not a reason to postpone existing exposure controls. WorkSafe Tasmania, Workplace Exposure Limits, introduction and affected-workplaces sections.
Current duties still matter
The current Work Health and Safety Regulations 2022 use exposure-standard terminology. Regulation 3 refers to the national document as updated or remade over time. Regulation 49 prohibits exposure above the applicable standard. Regulation 50 requires monitoring where there is relevant uncertainty or monitoring is necessary to assess health risk, with recording and access requirements. This guide reports the regulator’s transition statement; it does not claim to have identified a separate Tasmanian amendment prescribing every future substance limit. Tasmanian Regulations, regulations 3, 49–50.
Do not import another state’s exceptions
Safe Work Australia announced 1 June 2027 for the reduced benzene limit and directs readers to local regulators about implementation. Separately, the Australian Pesticides and Veterinary Medicines Authority describes 1 December 2026 for the national phosphine transition while noting that some states are delaying it. Neither statement establishes a Tasmanian-specific deferral. No such deferral was verified in this review. Benzene announcement, 29 October 2026; APVMA phosphine statement, 22 October 2026.
A practical preparation record
Identify contaminants actually used or generated, who may breathe them, existing controls and monitoring evidence. In correctional workplaces, assess relevant workshop, cleaning, maintenance and vehicle activities rather than assuming exposure from a job title alone.
WorkSafe recommends reviewing controls, using suitably qualified monitoring assistance where needed, and retaining evidence of the assessment. A removed limit for a non-threshold carcinogen does not mean the substance has become safe: elimination or minimisation remains central. WorkSafe Tasmania, carcinogens, preparation and monitoring sections.
Before relying on any concentration figure, verify the applicable Tasmanian position, substance identity, units, averaging period and sampling method. This guide deliberately provides no numerical exposure limits. Status checked 16 November 2026; recheck before applying later changes.

Comments